Eachine TRASHCANJust USD$99.00, buy Eachine TRASHCAN sale online china shop website at wholesale price with worldwide free shipping!

Eachine TRASHCAN 75mm Crazybee F4 PRO OSD 2S Whoop FPV Racing Drone Caddx Eos2 Adjustable Camera

Eachine TRASHCAN 75mm Racing Drone Features

  • PNP version support TBS receiver
  • 2S whoop more powerful and more flight time
  • New Crazybee F4 PRO Flight controller 1-2s Lipo Compatible
  • New 0803 Powerful and High efficiency Brushless motor and Smooth ESC
  • Betaflight support , multi flight mode: ACRO/AIR/ANGLE
  • Caddx EOS2 camera ready , More comfortable FPV experience
  • Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output)
  • VTX power switchable 25mw~200mw
  • Camera Angle adjustable (0-35°)
  • Adjust the settings and the PID of the flight controller via OSD
  • Smart Audio ready , change VTX bands, powers, channels via OSD
  • DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
  • Flysky version support both AFHDS and AFHDS-2A protocol transmitter
  • Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
  • Full telemetry function ready (Frsky Non-EU and Flysky version support)
  • No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS etc..
  • Taillight ready
  • Compatible both for 1s-2s
  • Real Bind and Fly version

Eachine TRASHCAN Racing Drone Specs

  • Brand Name: Eachine
  • Wheelbase: 75mm
  • Size: 98mm*98mm*36mm
  • Weight: 33g(without battery)
  • Weight: 48g(with Original 1s 300mah lipo battery x2)
Motor Mode: TC0803 KV16000
Configu-ration: 9N12P
Stator Diamter: 8mm
Stator Length: 3mm
Shaft Diameter: Φ1mm
Motor Dimension(Dia.*Len): Φ10.5mm*14.5mm
Weight(g): 2.2g
No.of Cells(Lipo): 1S-2S
Flight controller (Frsky version) CRAZYBEEF4 PRO FR Firmware target: CrazybeeF4FR
(Flysky version) CRAZYBEEF4 PRO FS Firmware target: CrazybeeF4FS
(DSM2/DSMX version) CRAZYBEEF4 PRO Firmware target: CrazybeeF4DX
(No RX version) CRAZYBEEF4 PRO FR Firmware target: CrazybeeF4FR
MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1-2S battery input (DC 3.5-8.7V)
Built-in 6A(each) Blheli_S 4in1 ESC Dshot600 ready
Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)
DSM2/X Version built-in Serial-based DSM2/DSMX compatible satellite receiver
No RX version need to add external Receiver
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 28A
Current meter scale set to 1175
Built-in 5V 1A Buck / Boost with LC filter
Built-in voltage detection
BLHELI_S pass-through Ready
Taillight LED Ready
Onboard 4in1 ESC MCU upgraded to EFM8BB21
Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
Current: 6A continuous peak 7A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.Hex
Default protocol: DSHOT600
Frsky NON-EU receiver Version SPI BUS receiver
Frsky D8/D16 switchable
Compatible Non EU transmitter both D8 and D16 mode
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Flysky receiver Version SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Failsafe support
DSM2/DSMX receiver version Serial bus receiver
Protocol: DSM2/DSMX compatible
Channels:6-9 (Depend on your radio)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
VTX Output power: 25/200mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels
With Raceband
Smart Audio ready
Weight: 3g
CADDX EOS2 camera 1/3″ CMOS Sensor
1200 TVL
2.1mm lens
4:3 Image size
NTSC
Global WDR
Internal Synchronization
Lipo Battery Capacity: 300mAh
Voltage: 3.8v
Continuous Discharge Rate: 40C
Instantaneous discharge rate: 80C
Size: 55mmx12mmx6.5mm
Weight: 7.8g
Connector: PH2.0
*Notes: Need 2pcs batteries for Series circuit

BNF Version Contents:

  • 1 x 75mm Brushless whoop Frame
  • 1 x 40mm propeller(4cw+4ccw)
  • 4 x TC0803 KV16000 Motor
  • 1 x Receiver (Option1)
  • 1 x Caddx EOS2 camera
  • 1 x 5.8G 40ch 25mw-200mw VTX
  • 1 x Propeller disassemble tool
  • 4 x 3.8v 300mah 40C/80C battery
  • 1 x USB Lipo/LIHV Charger
  • 1 x LED board
  • 1 x XT30 wire
  • 1 x Screwdriver
  • 1 x Bag

PNP/ NO Receiver Version Contents:

  • 1 x 75mm Brushless whoop Frame
  • 4 x TC0803 KV16000 Motor
  • 1 x Crazybee F4 PRO FC no RX verion
  • 1 x 40mm propeller(4cw+4ccw)
  • 1 x 5.8G 40ch 25mw-200mw VTX
  • 1 x Caddx EOS2 camera
  • 1 x Propeller disassemble tool
  • 4 x 3.8v 300mah 40C/80C battery
  • 1 x USB Lipo/LIHV Charger
  • 1 x LED board
  • 1 x XT30 wire
  • 1 x Screwdriver
  • 1 x Bag

The Last Eachine TRASHCAN price: USD$99.00~105.00

LEAVE A REPLY

Please enter your comment!
Please enter your name here